X55 profile

Hi,

here is the profile I created for EOC2 for a X55.

As far as I know, windows can sometimes change the joystick numbers around (I'm using pedals, not mapped for EOC2 however), so you probably will need to change joystick2 to 1, and 3 to 2 within the config file. Using notepad, and the replace all command, if you change from to 2 to 1, then from 3 to 2, it is only a few clicks . ( Joystick2, JoyButton11 to Joystick1, JoyButton11 for example)

It is mapped as follows:

Main trigger button - fire
Button 2 = cancel
Button 3 (top side right)- switch secondaries
Button 4 (thumb) -switch primary
POV up - contact list up
POV down - contact list down
Multi directional (next to POV) all menus and HUD navigation (starmaps etc)

Throttle:

Both throttles needs to be linked as one, otherwise, the top speed is 50% (not sure how or why).

Button 1 (red one) Target (and sub target/tag if in range).
Button 2 (push on the top large rotationay) engage/cancel LDS

UP/Down on the top multi small button - change hostile targets.


I tried to bind the contacts up/down to the rotationaries, but only the large one and RTY4 can be mapped it seems, and it is unusable for being way too fast. The scroll-wheel can not be mapped either unfortunately. I'm sure the saitek profiles can be used to change all this by remapping, but well ...

Thank you very much for this.
I was a bit lazy, but I've finally added it to the download section:

www.i-war2.com/downloads/download/29-con...files/419-saitek-x55

Also added a different Saitek X52 profile a user has sent me a few months ago via mail:

www.i-war2.com/downloads/download/29-con...52-profile-by-maahes